Dynex DX-G1113 - Manual (Page 46)

46 Installing your car stereo
Chevrolet
Lumina APV 1996
Oldsmobile
Silhouette1996
Pontiac
TransSport 1996
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the one Phillips screw from each side of the center console.
3 Open the glove box, then remove the two exposed Phillips screws.
4 Remove the two 7 mm hex-head screws and one pop-clip from the lower steering
column panel.
5 Remove the two exposed Phillips screws near the climate controls.
DX-G1113.fm Page 46 Wednesday, August 16, 2006 3:38 PM