Dynex DX-G1113 - Manual (Page 21)

Installing your car stereo 21
Cadillac
Eldorado 1984-1991
Cadillac
Seville 1984-1991
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two Phillips screws above the A/C vents.
3 Pull out of the top edge of the dash trim bezel, then remove it.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 21 Wednesday, August 16, 2006 3:38 PM