Dynex DX-G1113 - Manual (Page 54)

54 Installing your car stereo
Oldsmobile
98 1984-1990
Delta 88 1986-1988
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Place the gear shift in low, then remove the rubber trim boot from the steering
column.
3 Remove the two Phillips screws from the radio trim bezel.
4 Unhook the ashtray and light wiring terminal, then remove the trim bezel.
5 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
6 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 54 Wednesday, August 16, 2006 3:38 PM