Dynex DX-G1113 - Manual (Page 75)

Installing your car stereo 75
Saturn
All models 1991-1994
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Carefully unclip the dash trim bezel.
3 Remove the two screws from the factory head unit, then disconnect the wiring.
4 Cut and remove all mounting tabs on bracket 6 except the A tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
5 Go to “Completing the installation” on page 76.
A
A
DX-G1113.fm Page 75 Wednesday, August 16, 2006 3:38 PM