Dynex DX-G1113 - Manual (Page 49)

Installing your car stereo 49
Chevrolet
Nova 1985-1988
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the ashtray, then remove the two screws from the ashtray bracket.
3 Remove the two screws above the radio opening, then remove the radio trim bezel.
4 Cut and remove all mounting tabs on bracket 1 except the B tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
5 Go to “Completing the installation” on page 76.
B
DX-G1113.fm Page 49 Wednesday, August 16, 2006 3:38 PM