Dynex DX-G1113 - Manual (Page 13)

Installing your car stereo 13
Buick
Riviera 1983-1985
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Carefully pull to remove the dash trim bezel.
3 Remove the four screws that secure the factory head unit, then disconnect the wiring.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 13 Wednesday, August 16, 2006 3:38 PM