Dynex DX-G1113 - Manual (Page 18)

18 Installing your car stereo
Buick
Skylark 1987-1989
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unsnap the gear shift bezel from the base of the console. Remove the two screws that
secure the bottom of the dash trim bezel, then remove the bezel.
3 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
4 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 18 Wednesday, August 16, 2006 3:38 PM