Dynex DX-G1113 - Manual (Page 31)

Installing your car stereo 31
Chevrolet
Camaro 1997-2002
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip the radio trim bezel, then remove it.
3 Remove two 7 mm hex-head screws that secure the factory head unit, then disconnect
the wiring.
4 Locate bracket set 10.
5 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 31 Wednesday, August 16, 2006 3:38 PM