Dynex DX-G1113 - Manual (Page 62)

62 Installing your car stereo
Pontiac
Bonneville 1987-1993
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Carefully unsnap, then remove the dash trim bezel.
3 Remove the
screws that secure the factory head unit, then disconnect the wiring.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 62 Wednesday, August 16, 2006 3:38 PM