Dynex DX-G1113 - Manual (Page 76)

76 Installing your car stereo
Completing the installation
For all vehicles, perform the following steps to complete your car stereo installation.
Installing the faceplate
To install the faceplate:
1 Choose a faceplate (according to the installation depth).
2 Snap the faceplate onto the front of the radio housing. (If an equalizer will be included
in the installation, the equalizer faceplate must be used).
I
3 If you are installing an equalizer, slide the equalizer brackets into the slots along the
inner walls of the radio housing.
DX-G1113.fm Page 76 Wednesday, August 16, 2006 3:38 PM