Dynex DX-G1113 User Manual
Page 52
52
Installing your car stereo
Chevrolet
Van (full size) 1988-1995
GMC
Van (full size) 1988-1995
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Carefully unsnap the radio trim bezel, then remove it.
3 Remove two screws that secure the factory head unit, then disconnect the wiring.
4 Cut and remove all mounting tabs on bracket 1 except the C tabs. Each mounting tab
has a letter stamped on the back of the tab. Cut the tabs with the blade pointed away
from you and your fingers.
5 Go to “Completing the installation” on page 76.
C
C
DX-G1113.fm Page 52 Wednesday, August 16, 2006 3:38 PM