Dynex DX-G1113 - Manual (Page 38)

38 Installing your car stereo
Chevrolet
Citation II 1985
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two screws from the bottom of the steering column trim panel, then
remove the panel.
3 Remove the six screws from the dash trim bezel, disconnect the wiring, then remove
the bezel.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 38 Wednesday, August 16, 2006 3:38 PM