Dynex DX-G1113 - Manual (Page 32)

32 Installing your car stereo
Chevrolet
Caprice 1994-1996
Impala SS 1994-1996
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the five hex-head screws inside the ashtray compartment.
3 Remove the four hex-head screws from the base of the dash trim bezel.
4 Unsnap the fuse box cover, then remove the one exposed hex-head screw.
5 Remove two hex-head screws above the instrument cluster.
6 Move the gear selector to the D1 position, pull out on the cluster trim bezel, then
remove it.
7 Remove one exposed hex-head screw on the left side of the dash trim bezel.
8 Unclip the dash trim and radio bezels, then remove them.
9 Locate bracket set 10.
10 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 32 Wednesday, August 16, 2006 3:38 PM