Dynex DX-G1113 - Manual (Page 63)

Installing your car stereo 63
Pontiac
Bonneville 1994-1999
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Unclip the right side of the dash trim bezel.
3 Unclip the left side of the bezel, then remove it.
4 Remove the three 7 mm hex-head screws that secures the factory head unit, then
disconnect the wiring.
5 Locate bracket set 9.
6 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 63 Wednesday, August 16, 2006 3:38 PM