GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 80)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 77 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
Upon making the selection, the following window will appear.
Status Report Window Tabs
In the initial Reports window (shown above), 14 tabs are available; nine tabs are used to create and
generate reports and five tabs are used to configure the report options. The nine report type tabs are listed
and described below:
Table 23. Status Report Types
Report Tab Description
Call-In Exceptions The Call-In Exceptions report allows selection of specific criteria for limiting
information in the report based on abnormal (failure) conditions reported by a
phone during call-ins (maintenance calls).
Call-In A Call-In report lists the call-in records TMA received from telephones,
including its health status, during call-ins.
Phone Properties This report shows all the properties data in the database for phone records. The
data is presented in a one page per phone format. All phone records that meet
the selection criteria are displayed in the sort order requested.
Maintenance Calls The Maintenance Call report lists the data communications, or maintenance
calls, between an individual telephone and TMA. Voice communication calls at
the telephones are excluded from this report.
User Calls The User Calls Report displays records of voice communication calls to and
from individual telephones. Maintenance calls are excluded from this report.