GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 76)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 73 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
When
Call-In Schedule
is selected, the window shown below displays the telephone(s) that are scheduled
(in the database with an enabled status) for call-in to TMA.
The Call-in Schedule window displays several columns and two buttons. Each is explained below.
Table 21. Call-In Schedule Window Columns and Buttons
Column Description
Phone Displays the named descriptions assigned to each telephone.
Line Number Displays the PABX extensions assigned to each telephone.
Time Shows the time each telephone will call TMA to update status.
Day/Interval Denotes when each telephone is scheduled to call in based on the parameter set in the
Call-In Schedule in the Phone Management form, e.g., “Daily” or “Every n hours.”
N OTE : Telephones set to “Disable” or “Out of Service” will not appear in the list.
Synchronize Displays whether or not synchronization is pending for the telephone (awaiting next
telephone contact).
Button Function
Refresh When clicked, all information in the window is updated based on the most recent
entries or changes.
Close When clicked, the window will close.