GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 78)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 75 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
When
Current Poll List
is selected, the window shown below will appear displaying a list of all
telephones scheduled (in the database with an enabled status) for polling.
The Current Poll List window displays several columns and two buttons. Each is explained below.
Table 22. Current Poll List Columns and Buttons
Column Description
Phone Displays the description assigned to a telephone.
Attempts Displays how many attempts TMA has attempted to contact the telephone for polling.
N OTE : During polling TMA will make three attempts to receive a telephone’s health
status.
Synchronize Displays whether or not synchronization is pending for the telephone (awaiting next
phone contact).
In Process This column displays whether or not a poll call for the telephone is being processed.
N OTE : If a telephone has become inactive and appears on the inactive report for more
than a day, check the In Process field to verify it is not set to “True.” If the In Process
shows True, TMA is waiting for a response from the telephone. To reset the In Process to
“False,” perform a simple poll call to reset polling status of the telephone. For additional
information, refer to the “Troubleshooting” section.
Button Function
Refresh When clicked, all information in the window is updated based on the most recent entries
or changes.
Close When clicked, the window will close.