GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 43)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 40 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
Table 10. Input Switches
Designation Function
Emergency This is the dry contact switch connected to pins 1 and 2 at J7. This switch is typically
the E
MERGENCY
push button.
Call This is the dry contact switch connected to pins 1 and 2 at J1. This switch is typically
the C
ALL
push button.
Aux 1 Can be any dry contact switch connected to the AUX 1 input at TB6.
Aux 2 Can be any dry contact switch connected to the AUX 2 input at TB7.
Table 11. Drop-Down List Selections for Input Switches
Designation Function
Voice Call When selected, the input initiates a voice user call.
TMA
Maintenance
Call When selected, the input initiates a call-in to TMA.
Cancel Strobe When selected, the input terminates strobe activity.
Record
Greeting (Mic) When selected, the input activates the record mode of the optional Voice Annunciation
Module.
Hook Switch When selected, the input is designated as the handset cradle hookswitch for on/off-
hook conditions, unless overridden by another parameter.
Not Used The input is not used and is reserved for future use.
Not Used The input is not used and is reserved for future use.
Special 1 The input is reserved for custom applications.
Special 2 The input is reserved for custom applications.
Special 3 The input is reserved for custom applications.
Special 4 The input is reserved for custom applications.