GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) User Manual
Page 67
Pub. 42004-479B
Telephone Management Application (TMA) User Guide
Page 64 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
The SPI Call Status window consists of the following:
Table 19. SPI Call Status Window Information
Window Area
Information Displayed
Title Bar
The Title Bar displays the assigned TAPI line number.
Menu Area
The Menu has two selections, which are:
Actions – when selected, the SPI Menu (shown above) is displayed.
About – when selected, the SPI version installed on the PC is displayed.
Status Area
The Status Line reveals the following two states of the line, which are:
Idle – indicates the line is not in use.
Call in Progress – denotes that the line is being used to communicate with a
telephone.
Report Area
The Report area is the main portion of the Call Progress window which displays
status of the call-in real time.
Information in the Report area details the parameters communicated to or from
the telephone that appear in the Phone Management Form, such as the serial
number, software version, PABX extension number, call-in numbers, etc.
The results of the last call remains displayed in the window until another call is
placed.