GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 59)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 56 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
IP Configuration Properties
DHCP – Indicates the current state of DHCP. If DHCP is OFF, the telephone will use a Static IP
Address. This parameter can only be configured from the phone’s web page.
Address – The IP Address that uniquely identifies the phone on the local network and gives access to the
phone’s web page through an Internet browser. This parameter can only be configured from the phone’s
web page (DHCP must be OFF) and initially, the Address must be manually entered to match the IP
Address currently assigned to the phone. Alternately, the matching Host Name can be used (under Unit
Configuration) and the Address can be left blank.
Mask – The static sub-net mask. This parameter can only be configured from the phone’s web page.
Gateway – The static Gateway IP address. This parameter can only be configured from the phone’s web
page.
DNS1 – The IP address of the primary static DNS server. This parameter can only be configured from
the phone’s web page.
DNS2 – The IP address of the secondary static DNS server for redundancy. This parameter can only be
configured from the phone’s web page.
Local Domain – The Local Domain name of the network the phone is using. This parameter can only be
configured from the phone’s web page.
SIP Configuration Properties
Local IDs – Four possible values that form part of the phone’s Uniform Resource Identifier (URI)
specific to registering the phone with the SIP signaling protocol. This parameter can only be configured
from the phone’s web page.
Domains – Four possible values that form part of the phone’s Uniform Resource Identifier (URI) specific
to registering the phone with the SIP signaling protocol. This parameter can only be configured from the
phone’s web page.
Proxies – Four possible addresses used by the SIP proxy server used for incoming/outgoing calls. This
parameter can only be configured from the phone’s web page.
Registrars – Four possible addresses for registration used by the SIP proxy server. This parameter can
only be configured from the phone’s web page.
Unit Configuration Properties
Host Name – The Host Name that uniquely identifies the phone on the local network and gives access to
the phone’s web page through an Internet browser. This parameter can only be configured from the
phone’s web page and initially, the Host Name must be manually entered to match the Host Name
currently assigned to the phone. Alternately, the matching Address can be used (under IP Configuration)
and the Host Name can be left blank.