Fluke Biomedical SigmaPace 1000 - Manual (Page 98)

SigmaPace 1000
Operators Manual
4-12
F1 F2 F3 F4
eyr031.eps
2. Press the F4 LOAD UP or DOWN arrow key to select the desired load.
Test loads are available at 200, 500, and 1000 Ohms. Both atrial and
ventricular test loads are set simultaneously to the selected value.
3. Press F1 NEXT to advance the display to the SELECT TEST menu.
There are ten available Invasive tests.
F1 F2 F3 F4
eyr032.eps
4. Use the F4 >>> UP arrow key to navigate through the available test
selections.