Fluke Biomedical SigmaPace 1000 User Manual
Page 69
Transcutaneous Pacemaker Testing
Setup
and
Testing
3
3-15
F1
F2
F3
F4
eyr017.eps
4. Press
F2
SELECT DRIVE<
to toggle between the Overdrive and
Underdrive BPM rates.
5. Once a rate is selected, press
F4
DRIVE RATE BPM
UP
or
DOWN
arrow key to adjust that rate.
6. Press
ESC
to return to previous menu(s).
Continuous Mode Pacemaker’s Interaction with ECG
Signal
The following test verifies the continuous (or non-demand) pacemaker’s
ability to interact with a simulated ECG signal.
F1
F2
F3
F4
eyr014.eps
See also other documents in the category Fluke Biomedical Equipment:
- 7000DP Impulse Supplement (12 pages)
- 7000DP Impulse Getting Started (36 pages)
- 7000DP Impulse (92 pages)
- 06-526-2200 (26 pages)
- 07-417 (16 pages)
- 07-443 (14 pages)
- 07-451 (8 pages)
- 07-487 (12 pages)
- 07-453 (24 pages)
- 07-555 (8 pages)
- 07-553 (10 pages)
- 07-605-7777 (8 pages)
- 07-444 (46 pages)
- 07-618 (10 pages)
- 07-600 (6 pages)
- 07-591 (8 pages)
- 07-653 (8 pages)
- 07-633 (20 pages)
- 07-649 (14 pages)
- 07-661-7662 (12 pages)
- 07-645 (14 pages)
- 10100AT (80 pages)
- 07-644 (10 pages)
- 18-203 (4 pages)
- 07-621 (12 pages)
- 07-647 (12 pages)
- 18-207 (8 pages)
- 18-216-1000 (10 pages)
- 18-220 (10 pages)
- 18-228 (8 pages)
- 18-223 (18 pages)
- 18-229-1313 (6 pages)
- 18-250 (8 pages)
- 18-252 (6 pages)
- 18-303 (6 pages)
- 35035 (19 pages)
- 6000-528 (18 pages)
- 35080B (70 pages)
- 6000-529 (16 pages)
- 35080M (64 pages)
- 6000-530B (16 pages)
- 57-436 (12 pages)
- 57-440 (12 pages)
- 57-402 (32 pages)