Fluke Biomedical SigmaPace 1000 - Manual (Page 34)

SigmaPace 1000
Operators Manual
1-20
Amplitude Sensitivity Test
Test Type................................................................Qualitative
Channels
Single Channel Operation Only (Atrial or Ventricular)
Atrial Channel
Test Type................................................................Quantitative
Physiological Simulation
Selection..............................................................+P-Wave
Rate.....................................................................30 to 120 BPM, Waveform delayed by
80 % of the pulse-to-pulse
interval or 400 mS (whichever is
shorter).
Active Outputs
Atrial Channel (4mm Banana Jacks) Only Test Load(s)
Available Selection(s)..........................................(3) 200
Ω , 500 Ω , and 1000 Ω ±1 %
Default Setting.....................................................500 Ω
Waveform Selections ..........................................Square (SQU)
Triangle (TRI)
Haversine (HSN)
Sine Square (SSQ)
Asymmetrical Triangle (ISO)
(Fixed Width 2 mS rise time / 13 mS
fall time)
Default Setting .......................................................SSQ
Amplitude
Pacer Load Selection ..........................................500 Ω (default)
Range..............................................................0.05 mV
peak
(50 V
peak
) to 50.0 mV
peak
Accuracy..........................................................±5 % of setting
Resolution (Step Size).....................................0.05 mV
peak
steps from 0.05 mV
peak
to
0.95 mV
peak
0.50 mV
peak
steps from 1.0 mV
peak
to
50.0 mV
peak
Pacer Load Selection ..........................................200 Ω
Range..............................................................0.05 mV
peak
(50 V
peak
) to 20.0 mV
peak
Accuracy..........................................................±5 % of setting
Resolution (Step Size).....................................0.05 mV
peak
steps from 0.05 mV
peak
to
0.95 mV
peak
0.50 mV
peak
steps from 1.0 mV
peak
to
20.0 mV
peak