Fluke Biomedical SigmaPace 1000 - Manual (Page 100)

SigmaPace 1000
Operators Manual
4-14
F1 F2 F3 F4
eyr037.eps
2. Select the desired configuration:
• Press F2 ATR ONLY to display only atrial channel data.
• Press F3 VENT ONLY to display only ventricular channel data.
3. Press F4 LOAD UP or DOWN arrow key to simultaneously select the
desired test load for the atrial and ventricular channels.
The atrial and ventricular channels independently autorange to best
measure the incoming pacemaker activity. This
OUTPUT display can be
used to display single channel atrial, single channel ventricular, and dual
channel atrial and ventricular pacemaker activity. The unused channel
goes blank if no pacemaker activity is sensed.
4. Press F2 ATR ONLY or F3 VENT ONLY to display the following types
of information (the example is atrial channel):