Fluke Biomedical SigmaPace 1000 - Manual (Page 82)

SigmaPace 1000
Operators Manual
3-28
flexibility allows the user to enter either the actual test pacemaker values or the
selected rate and amplitude settings.
Deviation values are independently selectable from 2 % to 20 % in 1 %
increments. The Analyzer compares these incoming pacer pulses to the target
values. When the long-term test is complete, output pulses from the
pacemaker that were not within the selected limits may be reviewed.
F1 F2 F3 F4
eyr013.eps
1. From the SELECT TEST menu, press F2 LONG TERM .
F1 F2 F3 F4
eyr026.eps
2. Press F2 RATE to toggle between pulse rate and amplitude. This
parameter works with the LIMIT parameter to assign limits to both.