Comtech EF Data CLO-10 - Manual (Page 83)

CLO-10 Link Optimizer Revision 1
Front Panel Operation MN/CLO-10.IOM
Utility: FAST (FAST Code Options)
FAST: Config View
Board S/N: 123456789
Comtech EF Data’s FAST (Fully Accessible System Topology) system permits the purchase and
installation of options through special authorization codes, entered remotely or through the front
panel. FAST allows immediate implementation of different options through the user interface keypad.
All FAST options are available through the basic platform unit.
Select either Config or View using the W X arrow keys, then press ENTER .
If Config is selected:
Edit 20 digit FAST Code:
00000000000000000000 (ENT)
Enter the code carefully on the bottom line by using the ◄ ► arrow keys to move to each character
position, then editing the character in that position by using the ST arrow keys. Once the 20-digit FAST
Code has been correctly edited into place, press
ENTER . The CLO-10 will respond with “Configured
Successfully” if the new FAST option has been accepted:
Configured Successfully
(ENT or CLR)
Press ENTER or CLEAR to return back to the previous menu.
If the FAST Code is rejected, however, the following message is displayed:
FAST Code Rejected!
(ENT or CLR)
Press ENTER or CLEAR to return back to the previous menu.
If View is selected:
View Options: 01 (▲ ▼ ENT)
Bandwidth - Not Installed
By using the ST arrow keys, the user may review the Install Status for each available option. As
shown in the preceding example, the option’s number, description, and its Install Status are
displayed either as “Installed” or “Not Installed”. Press
ENTER or CLEAR to return
back to the previous menu.
6–27