Comtech EF Data CLO-10 - Manual (Page 78)

CLO-10 Link Optimizer Revision 1
Front Panel Operation MN/CLO-10.IOM
6.8 SAVE/LOAD
Save/Load Configuration:
Save Load (◄ ► ENT)
These sub-menus permit the user to store or load up to 10 different modem configurations in the
non-volatile memory of the modem.
Select Save or Load using the ◄ ► arrow keys, then press
ENTER .
Save/Load: Save (Save Configuration)
If Save is selected and a location is empty, what displays is similar to the following example:
Save Config to Loc: 9
Empty
(ST ENT)
However, if the location already contains data, what displays is similar to the next example:
Save Config to Loc: 9
10:37:32 30/11/07 (
ST ENT)
The user is shown the time and date stamp of the previously stored configuration, for
identification purposes.
Select the location to where the current configuration is to be stored, using the ST arrow keys,
then press
ENTER . Locations 1 through 10 are available.
If the selected location does not contain a previously stored configuration, the following screen is
displayed:
Your Configuration has been
Saved to Location 9 (ENT)
However, if the selected location does contain a previously stored configuration, the following
screen is displayed:
Location 9 Contains Data!
Overwrite? No Yes
(◄ ► ENT)
The user must select No or Yes using the ◄ ► arrow keys, then press ENTER . Selecting Yes
overwrites the existing configuration at the selected location.
6–22