Comtech EF Data CLO-10 - Manual (Page 79)

CLO-10 Link Optimizer Revision 1
Front Panel Operation MN/CLO-10.IOM
Save/Load: Load (Load Configuration)
If Load is selected and there is a configuration stored at the selected location, what displays is
similar to the following example:
Load Config from Loc: 9
10:37:32 30/11/07
(ST ENT)
Note that the stored configuration is identified with a date and time stamp.
If the selected location contains no data, what displays is similar to the next example:
Load Config from Loc: 9
Empty
(ST ENT)
Select the location from where the current configuration is to be loaded using the ST arrow
keys, then press
ENTER . Locations 1 through 10 are available.
If the selected location contains valid data, what displays is similar to the following example:
New Config has been Loaded
From Location 9
(ENT)
Press
ENTER or CLEAR to return back to the previous menu.
If the selected location contains invalid data, what displays is similar to the next example:
Warning! Location 9
Contains No Data!
(ENT)
Press
ENTER or CLEAR to return back to the previous menu.
6–23