Comtech EF Data CDD-562L - Manual (Page 248)

CDD-562L/564 Demodulator with IP Module Revision 2
Appendix D MN/CDD564L.IOM
D–32
D.5 Param Files
Param File Tag Values Associated with Parameter
SYS_WORKING_MODE
Router Mode
Easy Connect Mode
EASYCON_MCAST_MODE
Enabled
Disabled
HDR_REFRESH_UDP_RTP1 DeCIMal Value of 1…600
HDR_REFRESH_UDP DeCIMal Value of 1…600
HDR_REFRESH_ALL_OTHERS DeCIMal Value of 1…600
PAYLOAD_REFRESH DeCIMal Value of 1…600
TELNET_TIMEOUT DeCIMal Value of 1…60 Minutes
QOSMODE
Rule-Max/Pri Mode
Rule-Min/Max Mode
DiffServ Mode
DYNBUF_LATENCY DeCIMal value of 200 to 5000 mSec.
Rt#0 …. Rt#nnn
Route table entries Rt#0 is the first entry and can go upto 256 entries.
[No need to read this from param file, use RTG]
ROUTE_HDLC_ADDR_SAVE Corresponding HDLC Addresses for EthernetÆSat entries. [No need to read this from param file, use RTG]
DHCP_RELAY_IP_ADDR
DHCP Server IP Address. Possible values are:
NOT-DEFINED – When the parameter not set.
10.20.30.40 – When a DHCP Server IP Address is set.
REDUNDANCY_ACTIVE
Enabled
Disabled
BASE_BOOT_IMAGE
Latest
Image 1
Image 2
UPGRADE_SLOT
Oldest
Image 1
Image 2
BLINDLOAD_MCAST_ADDR
NOT-DEFINED when ip_addr is 0
Valid multicast IP address like 239.4.5.6