Comtech EF Data CDD-562L - Manual (Page 128)

CDD-562L/564 Demodulator with IP Module Revision 2
CDD-56X CLI and Telnet Operation MN/CDD564L.IOM
8–24
8.2.5.2 ARP Table Utilities page
Access the ARP Table Utilities page from the Protocol Configuration page.
Use this page to view and edit the ARP table defined by the demodulator. It allows up to 256
static IPÆMAC ARP entries. This page contains the following unique selections/fields:
Selection Entry Description
Entry001
through
Entry008 (256)
(The menu page displays 8 ARP
definitions at a time on the
demodulator. User can define up
to 256 ARP definitions.)
1
through
8
Define up to 256 static ARP definitions on the demodulator. A static
ARP definition is defined as:
• Unicast IP Address – This IP Address is used as a lookup
into the ARP table when the demodulator needs to resolve a
MAC or HDLC Address.
Restrictions:
o
IP Address must be on the same subnet as the
Ethernet Interface.
o
IP Address must be a valid Unicast address (Not
Multicast, broadcast, etc.)
• MAC Address – The MAC Address defines the hardware
destination MAC Address that is used when an Ethernet
packet is destined for an IP machine from the demodulator.
Delete ARP Entry D Allows deletion of a Static ARP entry. Queries the user for the IP
address of the ARP entry to delete.
Display ARP Tbl A Displays the entire IP to MAC ARP table, in blocks of 10 ARP
entries, including the static as well as dynamic ARP entries. Hit
‘Enter’ key to display next 10 entries, or ‘ESC’ key to return to ARP
Table Utilities page.