2 satellite/hdlc interface page – Comtech EF Data CDD-562L User Manual
Page 122

CDD-562L/564 Demodulator with IP Module
Revision 2
CDD-56X CLI and Telnet Operation
MN/CDD564L.IOM
8–18
8.2.3.2 Satellite/HDLC Interface page
Access the Satellite/HDLC Interface page from the Interface Configuration page.
This page contains the following unique selections/fields:
Selection
Entry Description
HDLC Addr Mode
[RO]
• Point-To-Point Mode – In this mode of operation, no HDLC
address is used over the satellite link. The restrictions on
using this mode are that it can only be used for pure Point-to-
Point configurations.
• Small Network Mode (up to 254 addresses) - In this mode of
operation, demodulator expects a single byte HDLC address
over the satellite link (0x1 – 0xFE).
• Large Network Mode (up to 32766 addresses) - In this mode
of operation, demodulator expects two byte HDLC address
over the satellite link (0x1 – 0xFFFE).
Receive HDLC Channel Addresses
(Per Demod)
H
Opens Receiver HDLC Channel Addresses (Per Demod) page.