3 selecting demodulators – Comtech EF Data CDD-562L User Manual
Page 163

CDD-562L/564 Demodulator with IP Module
Revision 2
HTTP (Web Server) Interface
MN/CDD564L.IOM
9–3
Figure 9-1. HTTP Interface “Splash” page
9.2.3
Selecting Demodulators
Two demodulator channels are available for selection on each page of the CDD-562L HTTP
Interface. Four demodulator channels are available on the CDD-564/564L HTTP Interface pages.
Select the individual demodulator channel
number, located in the upper left hand corner
of every web page, to designate that
demodulator as active. System-level web pages
that do not impact per-demod parameters (i.e.,
routing, administrative pages, etc.) are not
affected by any change to this demodulator
selection.