Comtech EF Data CDD-562L - Manual (Page 172)

CDD-562L/564 Demodulator with IP Module Revision 2
HTTP (Web Server) Interface MN/CDD564L.IOM
9–12
9.3.2.4 Admin | Features
Use this page to establish operating parameters for the demodulator’s standard and optional
features.
Figure 9-9. Admin | Features page
Features – Standard
• Click Enabled or Disabled to set either Telnet or Ping Reply functionality.
• Select Enabled or Disabled from either drop-down list to set operation for Downlink Route
All Available Multicast or L2 Rx Header Compression.
Fast Option Purchase
Fast Option Set: Enter the FAST Access Code obtained from Comtech EF Data into this field
Appendix C. FAST ACTIVATION PROCEDURE
Features – Optional
Select Enabled or Disabled from the available drop-down lists to set operation for STDMA,
Vipersat, IGMP, Auto Switching, or L3/L4/L5 RX Header Compression. Note that when a
feature is unavailable, the drop-down list for that selection will be rendered inoperable.
Click [Submit] to execute the changes made in these sections.