Comtech EF Data CDD-562L - Manual (Page 189)

CDD-562L/564 Demodulator with IP Module Revision 2
HTTP (Web Server) Interface MN/CDD564L.IOM
9–29
o Small Network – 0x1 to 0xFE
o Large Network – 0x1 to 0xFFFE
• Sat to Eth: Select the valid packet handling value for routing to a destination network, using
the drop-down list:
o Forward – Multicast is only forwarded across link if both units have this feature
enabled.
o Filter – A multicast packet is received but there is no application associated with it.
• Add/Change: Once a Multicast Route Entry is entered into the Name field, click Add/
Change to subsequently add to or to modify the Multicast Route Table.
• Delete: Once a Multicast Route Entry is entered into the Name field, click Delete to
subsequently remove the entry from the Multicast Route Table.
Click [Submit] to execute the entries to this section.
Multicast Route Table
This read-only window displays the current Multicast Route Table entries.