Comtech EF Data CDD-562L - Manual (Page 247)

CDD-562L/564 Demodulator with IP Module Revision 2
Appendix D MN/CDD564L.IOM
D–31
D.4.1.8.4 QoS Stats
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Clear All QoS
Queue Statistics QSA= QSA=x
1 – Clear all
stats
Command only.
Set QSA=1 to clear all QoS queue statistics. Also clears the default queue stats.
QSA=
QSA! None QSA=x
(see Description of Arguments)
Quality of Service
Stats Clear QSC=xx
xx=QoS rule
index xx – QoS rule
index for which
to clear stats.
Command only.
Clears the QoS statistics for a specified queue.
To clear default queue stats use ‘0’.
Examples:
<1/QSC=0 will clear default queue stats
<1/QSC=5 will clear stats of rule-5.
Note: The command can be issued only on active/configured queue. QSC=
QSC!
None QSC=xx
(see Description of Arguments)
Quality of Service
Statistics Get N/A String of QoS
Stats Query only.
Displays the QoS queue statistics of all active queues, in the form:
nnn|pp|aaaaaaaaaa|bbbbb|cccccccccc|dddddddddd|eeeeeeeeee|fffff|ggggg|hhhhh|iiii
where:
n = QoS Rule Number
p = Protocol number [Refer to QSR]
a = Sent Packets
b = Pkts per Second
c = Sent Bytes
d = Dropped Packets
e = Dropped Bytes
f = Current Transmit Rate [Kbps]
g = Average Transmit Rate [Kbps]
h = Maximum Transmit Rate [ Kbps]
I = Active Flow count associated with this QoS Queue.
Example: >0001/QST=
0| 19| 0| 0| 0| 0| 0| 0| 0| 0| 0chr(13)
1| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0chr(13)
QST! QST? QST=sssssssss…
String displaying QoS stats of
all active queues.
\r – CR – 0x0D
\n – Newline – 0x0A