Comtech EF Data CDD-562L - Manual (Page 135)

CDD-562L/564 Demodulator with IP Module Revision 2
CDD-56X CLI and Telnet Operation MN/CDD564L.IOM
8–31
Selection Entry Description
Descrambling B Select one of the following:
1 – Off
2 – On-Default
3 – On-IESS-315
Acquisition Range W Valid ranges are from 0 to 200 kHz:
• 1 to 32HKz if symbol rate < 625Ksymbol on CDD-564L
• 1 to 32HKz on CDD-564
Eb/No Alarm Point P Valid range is from 0.1 to 16.0.
8.2.7.1.2 Alarm Masks Configuration (Per Demod) page
Access the Alarm Masks Configuration (Per Demod) page from the Configuration page.
This page contains the following unique selections/fields:
Selection Entry Description
Rx AGC (Auto Gain Control) Mask D Select as [Active] or [Masked].
Eb/No Mask E Select as [Active] or [Masked].
LNB Mask J Select as [Active] or [Masked], when the presence of an LNB is
detected.