Comtech EF Data CDD-562L - Manual (Page 171)

CDD-562L/564 Demodulator with IP Module Revision 2
HTTP (Web Server) Interface MN/CDD564L.IOM
9–11
Host Access List
• IP (#) / Mask: The Host Access List is used to define which remote clients can connect when
the Access List is Enabled. Each entry allows a user to specify an IP address and a subnet
mask to define a unique class of machines that are allowed access.
For example, if a user wanted to grant access to a PC with an IP Address of 10.10.10.1 and
any PC on a subnet of 192.168.10.xxx, then the Access List would be defined as :
IP 1 / Mask: 10.10.10.1/32
IP 2 / Mask: 192.168.10.0/24
For IP 3 / Mask and IP 4 / Mask, make sure they are not 0.0.0.0/0. An entry with 0.0.0.0/0
simply means any machine is allowed to access.
• Access List: Use the Access List to grant access via HTTP and SNMP to a defined list of
client machines. From the drop-down list, select Enable or Disable. If Disabled, then any
client machine will be able to connect via HTTP and SNMP.
Click [Submit] to execute the changes made on this page.