Comtech EF Data CDD-562L - Manual (Page 112)

CDD-562L/564 Demodulator with IP Module Revision 2
CDD-56X CLI and Telnet Operation MN/CDD564L.IOM
8–8
8.2.2.2 Access Lists page
Access the Access Lists page from the Administration page.
If connecting to the IP modem (or demodulator) remotely, the IP address of the
machine used to manage the IP modem should be included in the Access List.
Use this page to limit monitor and control access to the unit from a specified list of authorized
clients. This page contains the following unique selections/fields:
Selection Entry Description
AccessClient1
through
AccessClient4
1
through
4
Allows definition of which remote clients can connect when the Access List
Enforcement is enabled. Each entry Allows user to specify an IP Address
or a subnet mask to define a unique class of machines that are allowed
access.
For example: If the user wanted to grant access to a PC with an IP
Address of 10.10.10.1 and any PC on a subnet of 192.168.10.xxx, then
the Access List would be defined as:
AccessClient1 …[10.10.10.1/32]
AccessClient2…. [192.168.10.0/24]
Access List Enforcement E Allows access to be granted via ping, Telnet, HTTP, FTP, and SNMP to a
well-defined list of client machines. Access List Enforcement toggles
between [Enabled] and [Disabled]:
• If enabled, then only those machines specified in the Access Client
List will be allowed to connect via ping, Telnet, HTTP, and SNMP.
• If disabled, then any client machine will be able to connect via ping,
Telnet, HTTP, FTP, and SNMP.