Compuprint 10200 Programmer Manual - Manual (Page 79)

Commands
75
ESC #
Cancels MSB control. (EPSON)
ASCII Code ESC #
Hexadecimal Value 1B 23
Decimal Value 27 35
This command cancels any controls on the MSB (bit number 7) set by ESC = or ESC >
commands; printer then accepts all MSB data as is.
ESC =
Sets MSB to 0. (EPSON)
ASCII Code ESC =
Hexadecimal Value 1B 3D
Decimal Value 27 61
This command sets the Most Significant bit (bit number 7) of all incoming data to 0. All data is
affected including graphics data.
ESC >
Sets MSB to 1. (EPSON)
ASCII Code ESC >
Hexadecimal Value 1B 3E
Decimal Value 27 62
This command sets the Most Significant bit (bit number 7) of all incoming data to 1. All data is
affected including graphics data.