Compuprint 10200 Programmer Manual - Manual (Page 37)

Commands
33
ESC <
Prints characters for one line from left to right. (EPSON)
ASCII Code ESC <
Hexadecimal Value 1B 3C
Decimal Value 27 60
This command causes the printing of one line from left to right.
ESC [ @
Selects the printing type style. (IBM 2391 + only)
ASCII Code ESC [ @ 4 0 m
1
0 m
3
m
4
Hexadecimal Value 1B 5B 40 04* 00* m
1
00* m
3
m
4
Decimal Value 27 91 64 4 0 m
1
0 m
3
m
4
(*) These values are constants.
This command is used to modify the type style of the character and the number of line spacing.
Use this command for:
1. Italic printing
2. Single-high character
3. Double-high character
4. Single-wide character
5. Double-wide character
6. Single Line Feed
7. Double Line Feed
These selections may be combined: italic print with double height, doublewide character and double
line feed.