Compuprint 10200 Programmer Manual - Manual (Page 71)

Commands
67
For the 24-dot images, the total number of data bytes (p
x
) to be sent is determined by the
following formula: 3.x.(n
1
+ n
2
x 256).
m DPI # DOTS DENSITY NAME
32 60 24 Normal density
33 120 24 Double density
38 90 24 CRT Graphic III
39 180 24 Triple-density
40 360 (virtual) 24 Hex-density
ESC ?
Reassigns dot graphics mode. (EPSON)
ASCII Code ESC ? n m
Hexadecimal Value 1B 3F n m
Decimal Value 27 63 n m
Reassigns one of the dots graphics mode (described in the command ESC *) to one of the
following commands: ESC K, ESC L, ESC Y and ESC Z. The parameter n specifies a character
(K, L, Y or Z) which is reassigned to specific mode m = 0,1,2,3.
m n m n
0 (K): ESC K graphic command 2 (Y): ESC Y graphic command
1 (L): ESC L graphic command 3 (Z): ESC Z graphic command