Compuprint 10200 Programmer Manual - Manual (Page 41)

Commands
37
ESC [ I
Sets font and pitch of a character. (IBM 2391 + only)
ASCII Code ESC [ I 2 0 m n
Hexadecimal Value 1B 5B 49 02 00 m n
Decimal Value 27 91 73 2 0 m n
This command allows modifying the font and pitch type style of a character.
The values 2 and 0 are constants. If font and pitch locks are active, this command is ignored. To
select the values for the variables m and n, which identify the pitch and the font type style to
use, refer to the table below.
1. Identify the type style (pitch and font) to use in the left column (pitch).
2. For the hexadecimal values for m n, look across the row to the second column (Hex m n)
3. For the decimal values for m n, look across the row to the third column (Decimal m n).
4. Substitute these values for m n in the printer command syntx.
Pitch Hexadecimal Decimal Dec. Value
m n m n (m x 256 + n)
Courier
10 00 0B 0 11 11
12 01 EB 1 235 491
15 01 EC 1 236 492
17 01 ED 1 237 493
20 01 EE 1 238 494
24 01 1E 1 30 286