Compuprint 10200 Programmer Manual - Manual (Page 110)

Commands
106
DC4 DC4 ESC T
Selects/loads or parks the fanfold from the Front1 path. (Compuprint)
ASCII Code DC4 DC4 ESC T n
Hexadecimal Value 14 14 1B 54 n
Decimal Value 20 20 27 84 n
Range 0 < n < 1
n Selection
0 Selects and loads the fanfold from the Front1 path. If the paper is present in the
Front2 path, the printer automatically parks this fanfold that is not requested
before loading the new one (after having pressed the
PARK key in response to the
TEAR IF NECESS/PARK PAPER message).
1 Parks the fanfold loaded from the Front1 path to allow the tear off function
(after having pressed the
PARK key in response to the TEAR IF NECESS/PARK
PAPER message).