Compuprint 10200 Programmer Manual - Manual (Page 100)

Commands
96
5 Print the bar code symbol with
both check digits generated by
the printer and put at the end
of the data. The 2
nd check digit
is IBM Modulus-10, the 1 st
check digit is the complement
to 11 of NCR Modulus-11
algorithm applied to the
received string: if the modulus
is 0 or 1 check digit is 0.
6 Print the bar code symbol with both
check digits generated by the printer
and put at the end of the data. The 2
nd
check digit is IBM Modulus-10, the 1 st
check digit is the complement to 11 of
IBM Modulus-11 algorithm applied to
the received string: if the modulus is
0 or 1 check digit is 0.
7 Print the bar code symbol with
both check digits generated by
the printer and put at the end
of the data. The 2
nd check digit
is IBM Modulus-10, the 1 st
check digit is the complement
to 11 of NCR Modulus-11
algorithm applied to the
received string: if the modulus
is 0 or 1. It is an error and
question marks will be printed
in place of HRC string, if
possible.
8 Print the bar code symbol with both
check digits generated by the printer
and put at the end of the data. The 2
nd
check digit is IBM Modulus-10, the 1 st
check digit is the complement to 11 of
IBM Modulus-11 algorithm applied to
the received string: if the modulus is
0 or 1. it is an error and question
marks will be printed in place of HRC
string, if possible.
The printer-generated second check digit does not show on required HRC string.