Compuprint 10200 Programmer Manual - Manual (Page 58)

Commands
54
ESC \
Prints characters from all characters table. (IBM)
ASCII Code ESC \ n
1
n
2
Hexadecimal Value 1B 5C n
1
n
2
Decimal Value 27 92 n
1
n
2
Range 0 < n
1
< 255
0 < n
2
< 255
This command prints the next n
1
+ n
2
x 256 characters from the table of all printable characters.
The total number of characters that will be printed from the table of all printable characters is
equal to n
1
+ (n
2
x 256). For example, to print 300 characters from the table of all printable
characters: n
1
= 44, n
2
= 1.
The control codes are not recognized as long as this sequence is active. The space character is
printed as an unassigned character.
ESC ^
Prints a single character from the all characters table. (IBM)
ASCII Code ESC ^ n
Hexadecimal Value 1B 5E n
Decimal Value 27 94 n
Range 0 < n < 255
This command prints the next character from the all characters table. This sequence prints only
one character from the all character table.