Compuprint 10200 Programmer Manual - Manual (Page 46)

Commands
42
ESC F
Cancels emphasized printing.
ASCII Code ESC F
Hexadecimal Value 1B 46
Decimal Value 27 70
This command ends emphasized printing. This escape sequence cancels emphasized printing
that was started by ESC E.
ESC G
Sets double strike printing.
ASCII Code ESC G
Hexadecimal Value 1B 47
Decimal Value 27 71
This command starts double-strike printing. ESC G may be canceled by ESC H.
ESC g
Sets 15 CPI. (EPSON)
ASCII Code ESC g
Hexadecimal Value 1B 67
Decimal Value 27 103
Subsequent data will be printed at 15 cpi. This command is accepted at any position within the
line. If you change the pitch during proportional mode (selected wih the ESC p command) the
change takes effect when the printer exits proportional mode.