Compuprint 10200 Programmer Manual - Manual (Page 52)

Commands
48
SO or ESC SO
Sets double width printing (one line).
ASCII Code SO or ESC S0
Hexadecimal Value 0E or 1B 0E
Decimal Value 14 or 27 14
This code causes subsequent data in the same line to be printed as double width characters. It is
canceled by the CR, LF, VT, FF and DC4 codes o when the buffer is full.
ESC s
Sets and resets Quiet printing. (EPSON)
ASCII Code ESC s n
Hexadecimal Value 1B 73 n
Decimal Value 27 115 n
This command controls printing speed as follows:
n Selection
0 Normal speed printing
1 Quiet speed printing