Compuprint 10200 Programmer Manual - Manual (Page 56)

Commands
52
SI
Sets compressed printing. (EPSON)
ASCII Code SI
Hexadecimal Value OF
Decimal Value 15
This command is accepted at any position within the line. DC2 code cancels the compressed
printing: The setting of this command depends on the horizontal spacing previously set
10 CPI
→
17 CPI
12 CPI
→
20 CPI
Proportional ½ width
DC2 code cancels the condensed printing.
SO
Sets double width printing (one line).
ASCII Code SO
Hexadecimal Value 0E
Decimal Value 14
This code causes subsequent data in the same line to be printed as double width characters. It is
cancelled by the CR, LF, VT, FF and DC4 codes o when the buffer is full.