Compuprint 10200 Programmer Manual - Manual (Page 36)

Commands
32
ESC [ -
Selects the score line. (IBM 2391 + only)
ASCII Code ESC [ - n
1
n
2
loc type
Hexadecimal Value 1B 5B 2D n
1
n
2
loc type
Decimal Value 27 91 45 n
1
n
2
loc type
Range n
1
= 2
n
2
= 0
This command selects several forms of overscore, underscore and strikethrough.
To select loc: To select type:
loc Selection type Selection
1 Underscore 0 Cancels line
2 Strikethrough 1 Single line
3 Overscore 2 Double line
255 Cancels all score selections
ESC :
Sets 12 CPI. (IBM)
ASCII Code ESC :
Hexadecimal Value 1B 3A
Decimal Value 27 58
This is a terminator code. It causes all data present in the print buffer to be printed. Subsequent
data will be printed at 12 cpi. This command is accepted at any position within the line. The
setting of another horizontal spacing resets this command.