Compuprint 10200 Programmer Manual - Manual (Page 215)

Interfaces
211
The pins 1 to 14 of the printer are connected to the pins with the same number of the parallel port
of the host.
The pins 19 to 30 of the printer are connected to the pins 18 to 25 of the parallel port of the host.
The pins 31, 32 and 36 of the printer are connected respectively to the pins 16, 15 and 17 of the
parallel port of the host.
1284 Mode signal names are shown with their Compatibility mode (Centronics) names in
parenthesis ( ) for the bidirectional link.
Signal Name Pin N°
for Signal Wire
Pin N°
for Return Wire
Source
HostClk (nStrobe) 1 19 HOST
AD1 (Data 1)
AD2 (Data 2)
AD3 (Data 3)
AD4 (Data 4)
AD5 (Data 5)
AD6 (Data 6)
AD7 (Data 7)
AD8 (Data 8) 2
3
4
5
6
7
8
9 20
21
22
23
24
25
26
27 HOST in Compatibility mode and negotiation
phase.
NOT
USED in Nibble mode.
BIDIRECTIONAL in Byte mode.
PrtClk (nAck) 10 28 PRINTER
PrtBusy (Busy) 11 29 PRINTER
AckDataReq (PError) 12 28 PRINTER
Xflag (Select) 13 28 PRINTER
HostBusy (nAutofd) 14 30 HOST